Allied Vision Technologies Guppy Manuel d'instructions télécharger pdf (Page 43)

Guppy PRO Technical ManualV4.1.0

Specifications

Guppy PRO F-503B/C

Feature Specification

Image device Type 1/2.5 (diag. 7.13 mm) Micron/Aptina CMOS MT9P031 w/ microlens

• Electronic rolling shutter (ERS) Global reset release shutter (GRR)

Effective chip size 5.7 mm x 4.3 mm

Cell size 2.2 μm x 2.2 μm

Picture size (max.) 2588 x 1940 pixels (Format_7 Mode_0)

Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

Maximum protrusion: 10.1 mm (see figure 24)

ADC 12 bit

Color modes Only color: Raw8, Raw12, Raw16, Mono8/12/16 (all F7 modes), YUV411 (all F7

modes), YUV422 (all F7 modes)

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps; 120 fps; Format_7: variable

frame rates up to 13 fps at full resolution; (64x64: up to ~ 830 fps)

Gain control Manual:0–12.04 dB (~0.125/step (1.02 - 0.28 dB/step))

12.57–18.06 dB (~0.5/step (0.53 - 0.28 dB/step))

Auto gain (select. AOI)

Shutter speed 20 μs to ~ 22.37 s

External trigger shutter Edge mode, programmable trigger delay

Look-up tables User-programmable (12 bit  10 bit); default gamma (0.45)

Smart functions AGC (auto gain control), AEC (auto exposure control), autofunction AOI, LUT,

mirror, binning, low-noise binning mode, sub-sampling, defect pixel correction,

color correction, hue, saturation, 1 storable user set. only color: auto white

balance

I/Os 1 configurable input (optocoupled), 3 configurable outputs (optocoupled)

Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s

Digital interface IEEE 1394b (IIDC V1.31), 1 x copper connector

Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE

Power consumption Typical 3.5 watt (@ 12 V DC) (full resolution and maximal frame rates)

Dimensions (L x W x H) 44.8 mm x 29 mm x 29 mm; incl. connectors, without tripod and lens

Mass 75 g (without lens) + 5 g filter ring

Operating temperature + 5 °C ... + 45 °C ambient temperature (non-condensing)

Storage temperature - 10 °C ... + 70 °C ambient temperature (non-condensing)

Regulations FCC Class B, CE, RoHS (2011/65/EU)

Standard accessories b/w: Protection glass, and color: IR cut filter

Optional accessories b/w: IR cut filter, IR pass filter, and color: Protection glass

On request Host adapter card, power out 6 W (HIROSE)

Software packages http://www.alliedvision.com/en/support/software-downloads (free of charge)

Table 15: Specification Guppy PRO F-503B/C

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 248 249

Pas de commentaire

Allied Vision Technologies Guppy Manuel d'instructions Page 43