Allied Vision Technologies Guppy Manuel d'instructions Page 38
- Page / 249
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Guppy PRO Technical ManualV4.1.0
38
Specifications
Guppy PRO F-046B/C
Feature Specification
Image device Type 1/2 (diag. 8mm) progressive scan SONY IT CCD ICX415AL/AQ w/ HAD microlens
Effective chip size 7.48 mm x 6.15 mm
Cell size 8.3 μm x 8.3 μm
Picture size (max.) 780 x 580 pixels (Format_7 Mode_0)
Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
maximum protrusion: 10.1 mm (see figure 24)
ADC 14 bit
Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV411, YUV422, RGB8
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps
Up to 62 fps in Format_7
Gain control Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)
Shutter speed 31 μs … 67,108,864 μs (~ 67 s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Look-up tables User-programmable (12 bit 10 bit); default gamma (0.45)
Smart functions AGC (auto gain control), AEC (auto exposure control), autofunction AOI, LUT,
binning (only b/w), sub-sampling (only b/w), color correction, hue, saturation, 1
storable user set
only color: AWB (auto white balance)
I/Os 1 configurable input (optocoupled), 3 configurable outputs (optocoupled)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface IEEE 1394b (IIDC V1.31), 1 x copper connector
Power requirements DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption Typical 3.5 watt (@ 12 V DC) (full resolution and maximal frame rates)
Dimensions (L x W x H) 44.8 mm x 29 mm x 29 mm; incl. connectors, without tripod and lens
Mass 75 g (without lens) + 5 g filter ring
Operating temperature + 5 °C ... + 45 °C ambient temperature (non-condensing)
Storage temperature - 10 °C ... + 70 °C ambient temperature (non-condensing)
Regulations CE, FCC Class B, RoHS (2011/65/EU)
Standard accessories b/w: Protection glass
color: IR cut filter
Optional accessories b/w: IR cut filter, IR pass filter
color: Protection glass
On request Host adapter card, power out 6 W (HIROSE)
Software packages http://www.alliedvision.com/en/support/software-downloads (free of charge)
Table 10: Specification Guppy PRO F-046B/C
- Technical Manual 1
- Guppy PRO 1
- Legal notice 2
- Contents 3
- Contacting Allied Vision 9
- Introduction 10
- Manual overview 17
- More information 20
- Before operation 20
- Guppy PRO cameras 22
- Conformity 23
- FireWire 24
- FireWire in detail 25
- 1394b port 28
- 1394a camera 28
- 1394a port 28
- 1394b camera 28
- 1394b bandwidths 30
- Operating system support 33
- Specifications 34
- Guppy PRO F-031B/C 35
- Guppy PRO F-032B/C 36
- Guppy PRO F-033B/C 37
- Guppy PRO F-046B/C 38
- Guppy PRO F-125B/C 40
- Guppy PRO F-146B/C 41
- Guppy PRO F-201B/C 42
- Guppy PRO F-503B/C 43
- Spectral sensitivity 44
- Red Green Blue 47
- Camera dimensions 53
- Tripod adapter 54
- Cross section: C-Mount 55
- Cross section: CS-Mount 56
- Filter and lenses 58
- Camera interfaces 62
- Status LEDs 64
- Error conditions 65
- Pulse-width modulation 73
- Pixel data 75
- Description of the data path 80
- White balance 81
- One-push white balance 83
- Auto white balance (AWB) 85
- Auto shutter 86
- Auto gain 87
- Manual gain 90
- (only Guppy PRO F-503B/C) 95
- Building defect pixel data 96
- Vertical binning 100
- Horizontal binning 102
- What is sub-sampling? 106
- Description of sub-sampling 106
- Packed 12-Bit Mode 113
- G3 B1 G4 B2 114
- P1 P2 P3 114
- R1 G1 R2 G2 114
- Hue and saturation 115
- Color correction 115
- Color conversion (RGB to YUV) 118
- Bulk trigger 118
- Level trigger 118
- Controlling image capture 119
- Trigger modes 121
- Overlapping 123
- Trigger delay 127
- Software trigger 129
- Debounce 129
- Debounce time 130
- Exposure time offset 132
- Minimum exposure time 132
- Extended shutter 133
- One-shot 134
- Multi-shot 137
- ISO_Enable / free-run 137
- Asynchronous broadcast 137
- Jitter at start of exposure 138
- Guppy PRO F-095C 148
- Area of interest (AOI) 157
- Autofunction AOI 159
- Frame rates 160
- Frame rates Format_7 164
- Test images 176
- Test images for color cameras 177
- Configuration of the camera 178
- Sample program 180
- Configuration ROM 181
- 0-7 8-15 16-23 24-31 182
- = value of directory entry 182
- Camera initialize register 184
- Name Field Bit Description 186
- Format_7 Mode_0 193
- Format_7 Mode_1 193
- Name Description 202
- Format_7 206
- Advanced registers summary 207
- Advanced feature inquiry 211
- Camera status 213
- Maximum resolution 214
- Time base 214
- Look-up tables (LUT) 218
- Defect pixel correction 220
- Input/output pin control 221
- Auto gain control 224
- Mirror image 227
- Soft reset 228
- Maximum ISO packet size 229
- Format_7 mode mapping 231
- (only Guppy PRO F-503) 231
- User profiles 234
- Pulse-width modulation (PWM) 237
- Global reset release shutter 237
- GPDATA_BUFFER 237
- Firmware update 239
- Appendix 240
Produits connexes et manuels pour appareil photos de pont Allied Vision Technologies Guppy
(78 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.182 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels