Allied Vision Technologies Guppy Manuel d'instructions Page 246

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 268
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 245
Guppy Technical ManualV7.4.0
246
Configuration of the camera
Auto shutter control
The table below illustrates the advanced register for auto shutter control. The
purpose of this register is to limit the range within which auto shutter operates.
When both auto shutter and auto gain are enabled, priority is given to increas-
ing shutter when brightness decreases. This is done to achieve the best image
quality with lowest noise.
For increasing brightness, priority is given to lowering gain first for the same
purpose.
Register Name Field Bit Description
0xF1000340 IO_INTENA_DELAY Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
ON_OFF [6] Enable/disable integration
enable delay
--- [7..11] Reserved
DELAY_TIME [12..31] Delay time in μs
Table 116: Advanced register: Delayed Integration Enable (IntEna)
Register Name Field Bit Description
0xF1000360 AUTOSHUTTER_CTRL Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..31] Reserved
0xF1000364 AUTOSHUTTER_LO --- [0..5] Reserved
MinValue [6..31] Minimum auto shutter value
0xF1000368 AUTOSHUTTER_HI --- [0..5] Reserved
MaxValue [6..31] Maximum auto shutter value
Table 117: Advanced register: Auto shutter control
Note
Values can only be changed within the limits of shutter
CSR.
Changes in auto exposure register only have an effect
when auto shutter is enabled.
Auto exposure limits are: 50..205 (SmartViewCtrl1
tab: Target grey level)
Vue de la page 245
1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 267 268

Commentaires sur ces manuels

Pas de commentaire