Allied Vision Technologies Guppy Manuel d'instructions télécharger pdf (Page 242)

Guppy Technical ManualV7.4.0

242

Configuration of the camera

Frame information

This register can be used to double-check the number of images received by the

host computer against the number of images which were transmitted by the cam-

era. The camera increments this counter with every FrameValid signal. This is a

mirror of the frame counter information found at 0xF1000610.

The FrameCounter is incremented when an image is read out of the sensor.

The FrameCounter does not indicate whether an image was sent over the IEEE

1394 bus or not.

0xF1000270 FRAMEINFO Presence_Inq [0] Indicates presence of this fea-

ture (read only)

ResetFrameCnt [1] Reset frame counter

--- [2..31] Reserved

0xF1000274 FRAMECOUNTER FrameCounter [0..31] Number of captured frames

since last reset

Table 114: Advanced register: Frame information

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 267 268

Pas de commentaire

Allied Vision Technologies Guppy Manuel d'instructions Page 242