Allied Vision Technologies GX1660C Spécifications télécharger pdf (Page 38)

GX1660 Technical Manual Page 38

IrisVideoLevelMin - In 10 mV units. Limits the minimum driving voltage for opening the lens iris. Typically this will be 0.

WhiteBalance

Auto

The following parameters are used to control the way that the Auto whitebalance function operates.

WhitebalAutoAdjustDelay - Currently unimplemented.

WhitebalAutoAdjustTol - A threshold. This parameter sets a range of scene color changes in which the automatic

whitebalance will not respond. This parameter can be used to limit whitebalance setting changes to only larger variations in

scene color.

WhitebalAutoAlg - The whitebalance algorithm is fixed as "Mean", that is, the algorithm uses the mean histogram value for

the red and blue channels in its calculations.

WhitebalAutoRate - In percent. Determines how fast the Auto Whitebalance updates.

WhitebalMode

Manual – Auto whitebalance is off. Whitebalance can be adjusted directly by changing the WhitebalValueRed and

WhitebalValueBlue parameters.

Auto - Whitebalance will continuously adjust according to the current scene. The Auto function operates according to the Auto

and DSP controls

AutoOnce – A command (of type Enumeration in PvAPI). A single iteration of the auto whitebalance algorithm is run, and

then the camera reverts to Manual WhitebalMode. The AutoOnce function operates according to the Auto and DSP controls

WhitebalValueRed – Red gain expressed as a percentage of the camera default setting.

WhitebalValueBlue - Blue gain expressed as a percentage of the camera default setting.

GigE

BandwidthCtrlMode

StreamBytesPerSecond - The default mode of bandwidth control. See the StreamBytesPerSecond control for more information.

SCPD - Stream channel packet delay expressed in timestamp counter units. This mode is not recommended.

Both - Implements a combination of control modes. This mode is not recommended

Ethernet

DeviceEthAddress - The physical MAC address of the camera

HostEthAddress - The physical MAC address of the host network card

DeviceEthAddress - The current IP address of the camera

HostEthAddress - The current IP address of the host network interface.

GvcpRetries - The maximum number of resend requests that the host will attempt when trying to recover a lost packet.

1 2 ... 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Allied Vision Technologies GX1660C Spécifications Page 38